Menu
Your Cart

WATERCRAFT

Brand: HYDRO-TURF Model: HT68
FITS ON KAWASAKI 800 SX-R (-12) Upgrade your PWC with new traction mats from Hydro-Turf. Available in many colors and grooves..
45.00KD
Brand: JET PILOT Model: ACS21317
Our Jetpilot Hooded Towel is a super comfortable and must have accessory for all water sports to keep you on the go. Product Description.100% Micro Fibre HoodExternal Front PocketReusable PackagingPlease refer to care instructions before use..
34.00KD
Brand: 100% Model: 10011-001-
Dry & Light WeightMother Nature has met her match with this low profile glove engineered to keep you going fast in cold, wet weather. Laminated insulated shell with waterproof breathable insert blocks out the water and keeps they dry while maintaining exceptional dexterity and control of your bi..
18.00KD
Brand: K&S Model: 56-201
3/8" 90 Degree Water Bypass Fitting Black 56-2012, 90 degree angled outlet, 3/8" hose fitting..
9.00KD
Brand: ADA RACING Model: 31-130390
3 degree angled reed spacer kit for the Kawasaki 800 and 750 engines. Includes billet aluminum spacers, gaskets, studs, and 1 additional pulse fitting. The studs that are included are for the stock intake manifold. If you are using an aftermarket intake, you may need to use longer studs if t..
40.00KD
Brand: ADA RACING Model: 34-130390
Yamaha 701/760 angled reed spacer kit. This will increase the case volume and direct the intake flow upward towards the transfer ports, resulting in improved power throughout.Includes billet reed spacer, gasket, and hardware.This only works on the 62T 701 cases and 760 cases.  It will NOT w..
40.00KD
Brand: ADA RACING Model: 30-4501
Billet aluminum bilge outlet fitting for use with a 3/4 inch hose...
8.50KD
Brand: ADA RACING Model: 31-459
Billet aluminum bow eye bushing for Kawasaki Jet Skis. Bushing has a 1" diameter and a 0.815" thru hole...
8.00KD
Brand: ADA RACING Model: 30-405590
8mm cable to 10mm throttle adaptor for Kawasaki Jet Skis when using and aftermarket throttle lever assembly.  These are machined in-house from brass.  Sold with the adaptor and locking nut...
7.00KD
Brand: ADA RACING Model: 30-405190
Billet brass throttle cable adaptor for Yamaha Super Jet, WaveBlaster, etc. Also fits 1995 and earlier Kawasaki standup Jet Skis. This adaptor converts a 6mm threaded cable end to 10mm...
7.00KD
Brand: ADA RACING Model: KA800DCS
New lightweight design for 2018!  Billet aluminum drive coupler set. Uses stock Kawasaki 750/800 rubber dampner.  Machined in hex on backside.  Clear anodized for protection against salt water corrosion...
35.00KD
Brand: ADA RACING Model: 34-1202
Billet aluminum carb adaptor for K&N flame arrestor with a 2-3/4" mounting diameter. Yamaha 701 Super Jet engines with dual 38mm Mikuni carbs. Includes mounting bolts...
10.00KD
Brand: ADA RACING Model: YA701L
Billet head shell for the Yamaha 701/760.  All ADA Racing billet heads are made from 6061-T6 aluminum and CNC machined in-house for consistency and performance. The head shell is then anodized for durability and protection against salt-water corrosion. This is the head shell only and in..
Starting From 140.00KD
Brand: ADA RACING Model: 34-6601
Billet hood hooks for the Yamaha Super Jet designed by freestyle guru Jeremy Parr. Instead of the hood sliding forward into the hooks, these face forward so the the hood comes back into them holding the hood from coming backward...
25.00KD
Brand: ADA RACING Model: KA800ST
Billet aluminum handlepole spring tensioner for the Kawasaki 800SXR and 1500SX-R. Includes billet black anodized bracket and stainless hardware...
18.00KD
Brand: ADA RACING Model: WB37590
3/8" Water Bypass Fitting by ADA Racing®. Billet aluminum PWC water bypass. For 3/8" id waterline and 1/2" hole thru the hull. Anodized for protection against corrosion. If you’re looking for a quality product that will serve you for years to come, look no further...
8.50KD
Brand: ADA RACING Model: YA2135L
Cylinder Dome with O-Rings (YA2135L) by ADA Racing®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs and deliver great quality at an affordable cost. This product is made of ..
15.00KD
Model: UL-2
Contains three different keys to fit all PWC brands: Sea-Doo (non-DESS), Yamaha, Kawasaki, Polaris, Tigershark and Wet JetComfortable floating wristband, floating vest lanyard and high-pitch pea-less whistleA swivel snap hook keeps the cord from tangling..
10.00KD
Brand: ATLANTIS Model: A2691
Easy-to-useJust push into aftermarket water bypassNo tools, clamps or extra hoses necessaryBack flushes entire cooling system instead of forcing salt and sand into cooling jackets..
12.00KD
Brand: ATLANTIS Model: A2104
Atlantis easy-glide slider can be attached to jacket or wristTop-quality replacement lanyards for most models without DESSVery affordable alternative to OEM lanyards..
7.00KD
Brand: ATLANTIS Model: A2096
Atlantis easy-glide slider can be attached to jacket or wristTop-quality replacement lanyards for most models without DESSVery affordable alternative to OEM lanyards..
7.00KD
Brand: ATLANTIS Model: A-8130
Atlantis easy-glide slider can be attached to jacket or wristTop-quality replacement lanyards for most models without DESSVery affordable alternative to OEM lanyards..
7.00KD
Brand: ATLANTIS Model: A-8129
Atlantis easy-glide slider can be attached to jacket or wristTop-quality replacement lanyards for most models without DESSVery affordable alternative to OEM lanyards..
7.00KD
Brand: ATLANTIS Model: A-3201
Now there is a way to ride all non-DESS watercraft without changing lanyards..
10.00KD
Brand: ATLANTIS Model: A3205
Now there is a way to ride all non-DESS watercraft without changing lanyards..
10.00KD
Brand: ATLANTIS Model: A-3202X
Now there is a way to ride all non-DESS watercraft without changing lanyards..
10.00KD
Brand: Blowsion Model: 06-01-104
Product DescriptionThe Blowsion Bilge Pump Mount is designed to mount the Rule Bilge Pump (Sold Separately). The bracket mounts to the lower two bolts of the driveshaft bearing carrier. Includes rivets to mount bilge pump strainer to bracket. Anodized Black. Fits all Kawasaki SXR 1500 Mode..
15.00KD
Brand: Blowsion Model: 06-01-152
Product DescriptionSingle bilge pump mounting bracket for all 1994 and newer Yamaha Super Jet Models. The bracket locates the bilge pump within millimeters from the base of the Super Jet hull. Easy built in installation, no messy adhesives. All hardware included.NOTE: 1990-1993 Yamaha Superjets with..
15.00KD
Brand: Blowsion Model: 02-02-432
Replaces that easily broken OEM Yamaha intake duct with one that is nearly unbreakableUpdated and redesigned with an incredibly easy fitFor 144 mm pumps only..
45.00KD
Brand: Blowsion Model: 04-03-258
Blowsion Billet Exhaust Nozzle for all 1996 and Newer Yamaha Superjet Models. Updated carefully for 2008 to fit the new narrower Super Jet bottom hull as well as 1996-2019 models. This is one ultra off the hook nozzle. Function and fit are Blowsion perfect. Vanity rules on these beauties. Available ..
30.00KD
Brand: Blowsion Model: 04-03-152
Product DescriptionBlowsion Low Pro Billet aluminum fuel caps for all Yamaha watercraft. Low profile smooth design allows for outside fueling, yet will not get in the way during aerial or freestyle moves around the front of the watercraft. Engraved grooves allow for easy handling. Available in black..
25.00KD
Brand: Blowsion Model: 04-03-310
Eliminates breaking of expensive bilge switches and primer bulbsMount enables the switch/primer to sit flush, eliminating the risk of being knocked offIncludes a brushed aluminum black anodized bezel and all necessary mounting hardwareDash mount measures approximately 3.6" L x 1.5" W x 1.1" DBezel O..
20.00KD
Brand: Blowsion Model: 4805-0032
Lightweight designThe same plates used by professional racers worldwide..
95.00KD
Brand: Blowsion Model: 06-05-005
Product DescriptionGusseted and welded heavy duty aluminum construction with easily fold-able hinged design make transportation and storage simple and sanitary. Features 1.5 inch Blowsion sublimated webbing with all stainless hardware. Allows the rider to elevate the ski in shallow water protecting ..
85.00KD
Brand: Blowsion Model: 4807-0041
KOMMAND BILLET STEERING SYSTEMSW/O TURNPLATE OR SHORT VERSIONWorks with Blowsion short and standard length Kawasaki and Yamaha billet turnplatesSteering head and bearing housing are carbon anodized for corrosion protectionFits stock or aftermarket handlepoles on all years Yamaha SJ and Fx1, Kawasaki..
88.00KD
Brand: Blowsion Model: 07-02-121
Product Description14 color combos to choose from. These are not cheesy vinyl. Full screen-printed die cuts with UV protective clear. Show your vanity! Priced each. 4.5 inch width is perfect for helmets, handle poles or the neighbors cat...
1.50KD
Brand: Blowsion Model: 0632-0490
For use with Blowsion Billet Throttle LeversThrottle cable adapter is required to run most aftermarket throttle levers..
7.00KD
Brand: Blowsion Model: 1011-2467
Solid and bulletproof, the filter element section is conical shaped (2-1/2" tall) with directional air flow pleats in the arrestor materialA clear velocity cone on the inside enhances and directs airflow into the carburetor for increased overall performanceFeature a unique design water-deflection co..
25.00KD
Brand: Blowsion Model: 01-02-017
Solid and bulletproof, the filter element section is conical shaped (2-1/2" tall) with directional air flow pleats in the arrestor materialA clear velocity cone on the inside enhances and directs airflow into the carburetor for increased overall performanceFeature a unique design water-deflection co..
25.00KD
Brand: Blowsion Model: 01-02-019
Solid and bulletproof, the filter element section is conical shaped (2-1/2" tall) with directional air flow pleats in the arrestor materialA clear velocity cone on the inside enhances and directs airflow into the carburetor for increased overall performanceFeature a unique design water-deflection co..
25.00KD
Brand: Blowsion Model: 01-02-020
Solid and bulletproof, the filter element section is conical shaped (2-1/2" tall) with directional air flow pleats in the arrestor materialA clear velocity cone on the inside enhances and directs airflow into the carburetor for increased overall performanceFeature a unique design water-deflection co..
25.00KD
Brand: Blowsion Model: 06-01-066
Vacate Valves operate on the same principle as the Blowsion One Way valves, using the forward motion of the watercraft and gravity to allow ingested water to simply vacate the hull in one direction onlyDirect threaded replacements for the flimsy OEM plastic drain plugs, the Vacate Valve also simplif..
15.00KD
Brand: Blowsion Model: 04-04-301
Secure your stand-up's hood to avoid accidental dislodging during freestyle and freeride maneuvers. All stainless mounting hardware and instructions included. Adjustable to fit all models of stand-up PWC...
15.00KD
Brand: BOSS Model: B10MUSB35
UNIVERSAL USB/3.5mm AUXILIARY INTERFACE MOUNTUse with any Radio with Rear USB/RCA InputsDustproof, Water Resistant Rubber CoverUV ResistantUSB / RCA 6 Feet Extension Cable1.5" Through Hole Mount–Requires 1-1/8" (29mm) Cutout..
8.00KD
Brand: BOSS Model: B10MR652C
The Excellent Quality Boss Audio MR652C 6.5" 2-Way Marine Speakers - (Pair) White Product description 6.5" 2-Way Marine Speaker

Includes removable tweeters and crossovers to be used as a component set.

Features:
•     Power Handling, Peak: 350W
•     Imped..
18.00KD 30.00KD
Brand: BOSS Model: B10MR50W
General Specs•     Weather Proof Full Range 5.25" 2-Way Speaker Pair•     150 Watts MAX 75 Watts RMS Power Handling per Pair•     80 Hz to 20 kHz Frequency Response and 89dB Sensitivity•     Polypropylene Woofer Cone ..
7.80KD 13.00KD
Brand: BOSS Model: B10MRGB65B
BOSS Audio Systems BOSS Audio MRGB65B 6.5 Inch Marine Speakers - Weatherproof, 200 Watts Per Pair, 100 Watts Each, Multi-Color Illumination, Full Range, 2 Way, Sold In Pairs, BLACK •     Full Range 200 Watt 6.5" 2-way Speakers •     Power Handling (peak): 1..
23.40KD 39.00KD
Brand: BOSS Model: B10MR60W
BOSS Audio Systems MR60W 200 Watt Per Pair, 6.5 Inch, Full Range, 2 Way Weatherproof Marine Speakers Sold in Pairs About this item •     Brand: Boss Audio Systems •     200 Watt max power 2-way marine loudspeaker •     Mounting Depth 2-5/..
10.20KD 17.00KD
Brand: BOSS Model: B10MR6W
BOSS Audio Systems MR6W 180 Watt Per Pair, 6.5 Inch, Full Range, 2 Way Weatherproof Marine Speakers Sold in Pairs Model Name MR6W Brand BOSS Audio Systems Sound clarity 80 hertz Color WH..
7.20KD 12.00KD
Brand: BOSS Model: B10MR52B
•                   BOSS Audio Systems MR52B 150 Watt Per Pair, 5.25 Inch, Full Range, 2 Way Weatherproof Marine Speakers Sold in Pairs•     Weather Proof Full Range 5.25" 2-Way Sp..
12.00KD
Brand: BOSS Model: B10MRC10
BOSS Audio Systems MRC10 Marine Waterproof Radio Cover, White  •     Weather Proof Featuring Spring Activated Flip-up Cover•     Poly-Carbonate Tinted Front Panel•     UV-stabilized ABS Plastic•     Impact-re..
12.00KD
Brand: K&S Model: 58-0971
Cast aluminum and anodized;Unique design allows butterfly valve on carb to open fully for top performance;Fits 86-95 Kawasaki and PolarisAdapter required for Sea-Doo, Yamaha, and Kawasaki 96-06;Requires adapter for each specific application not listed above;Adapter fits WPS cast and UMI billet throt..
25.00KD
Brand: JET PILOT Model: JA7009
Description Features 1.5 kg Coated Grapnel Anchor7.6m or marine grade anchor lineComplete system stows in small spacesStainless steel snap hookPadded nylon case protects finishes and dampens noise when stowed..
25.00KD
Brand: WSM Model: 003-201
HIGH-PERFORMANCE COUPLER DAMPERSRubber coupler damper for WSM billet coupler kits or OEM replacementFITMENTS:MakeModelYear(s) KawasakiJS 3001986-1988 KawasakiJS 4401977-1992 KawasakiJS 5501982-1989 KawasakiSC 6501991-1995 KawasakiSS 7501992-1997 KawasakiSSXI 7501993-199..
12.00KD
Brand: K&S Model: A2025
Simple way to keep your bilge empty as you driveUniversal kit fits Yamaha FX and VX models and comes complete with all hardware to convert new Sea-Doo and Polaris modelsKawasaki and Yamaha systems are even easier – just unscrew existing drain plug and screw the duckbill drain plug into place..
15.00KD
Model: FIN701SJ02
The Factory Pipe 701 Super Jet comes complete with the exclusive tune-able headpipe, aluminum chamber, tuned exhaust manifold and all required hardware. It is available in both a MOD (FIN701SJ02 - PN# 01-01-054) version. Fits all years of Super Jet with 701 motor. Will not fit 650 motor Super Jets. ..
385.00KD
Brand: FACTORY ZERO Model: JL278
FACTORY ZERO ATV Hitch Kit for JET Launcher 4 Wheels SX-R 1500..
89.00KD
Brand: FACTORY ZERO Model: J-130SX
The best selling Jet Launcher for Stand-Up Ski in Japan.Quick and Easy assembly and disassembly that does not require any tools.No bolts and nuts. Just pull and push Hitch Pins and assembly and disassembly is complete in just minutes.A special angle handle design makes it easy to launch and load a s..
295.00KD
Brand: FACTORY ZERO Model: J-150-4S
We upgraded new JET LAUNCHER is based on the conventional J-130SX.Used a new high strength original 44 mm square pipe material.This Jet Launcher lengthened the frame to get a good balancefor a long hull.It also strengthened the axle part that can withstandthe weight of 4 cycles.Change to bar grip ty..
345.00KD
Brand: FACTORY ZERO Model: J-1480-4X
Extra strong and durable design with bolts and nuts assembly.This model is designed for the large 3 seat watercraft.Just load PWC onto tote and push across any and all surfaces. BOX : H1635xW260xD170mm/11.5kg        H640xW530xD90mm/1.4kgTIRE :H475xW475xD510mm/12kg ..
425.00KD
Brand: Blowsion Model: 01-01-761
Product DescriptionFlow Control Valve - 3/8" Adjustable Pro Model. This 3/8" valve has been designed to prevent water flow to the waterbox at idle and off idle engine speeds. This allows the craft to be more responsive off the line and around turns. Results are HUGE gains in throttle response. All s..
25.00KD
Brand: ATLANTIS Model: A2500
FLUSH KITSAllow easy flushing of cooling system to keep it at peak efficiencyClean system of debris and contaminants including saltwater, sand and sedimentKits designed for specific applicationsQuick-snap release feature available for most modelsReplacement adapter hoses with quick-snap ends availab..
10.00KD
Brand: K&S Model: FZSF3102
FROGZSKIN YAMAHA SUPER JET 701 (5 PIECES)Frogzskin's Universal Kits can be used in multiple locations, in combination with multiple sizes, or model specific kits to maximize cooling airflow.FITS YAMAHA SUPERJET 701 1996-2020..
20.00KD
Model: 0706-0282
Premium transparent polyurethane tubing85 durometer provides superior abrasion, kink, tear, oxidation and chemical resistanceIncludes a very strong nylon inner band yet remains flexibleOperating temperature -40° F to 155°F; melting temperature 370°FWithstands up to 200 PSIMade in the U.S.A.Do not us..
15.00KD
Brand: HYDRO-TURF Model: TS43
Get added control by adding 1″ thick Side Lifter Wedges. Available in Black only. Comes with 3M self-adhesive backing for a strong bond to paint or fiberglass..
15.00KD
Brand: HYDRO-TURF Model: AZ-SEW74-A
This is a HT Premier seat cover in our Standard Colorway A (Black Suede, Black Carbon Fiber, White Stitch design). If you want to choose the color and material for each panel on the seat..
80.00KD
Brand: HYDRO-TURF Model: HT681
Upgrade your PWC with new traction mats from Hydro-Turf. Available in many colors and grooves..
45.00KD
Brand: HYDRO-TURF Model: AZ-SEWFX3-A
This is a HT Premier seat cover in our ALL BLACK Standard Colorway A (Black Suede, Black Carbon Fiber and White Stitching)...
120.00KD
Brand: HYDRO-TURF Model: AZ-SEWFZS-B
This is a HT Premier seat cover in one of our Standard Colorways (As Shown)...
90.00KD
Brand: HYDRO-TURF Model: AZ-SEWVXR1-B
This is a HT Premier seat cover in one of our Standard Colorways..
110.00KD
Brand: HYDRO-TURF Model: HT885
Upgrade your PWC with new traction mats from Hydro-Turf. Available in many colors and grooves...
55.00KD
Brand: HYDRO-TURF Model: HT811
Upgrade your PWC with new traction mats from Hydro-Turf. Available in many colors and grooves.Mats include 3M Self-Adhesive for a much faster and cleaner installation...
45.00KD
Brand: HYDRO-TURF Model: HT813
Upgrade your PWC with new traction mats from Hydro-Turf. Available in many colors and grooves.Mats include 3M Self-Adhesive for a much faster and cleaner installation...
45.00KD
Brand: HYDRO-TURF Model: HT791
Upgrade your PWC with new traction mats from Hydro-Turf. Available in many colors and grooves..
45.00KD
Brand: JET TRIBE Model: JTG-20470BO
COMFORT FOAM:The pre-formed mold curves around the chest and back for ultimate flexibilityCOMPETITION LEVEL VEST:SGS Buoyancy Certified for closed course racing or private recreation. No USCG Certification...
65.00KD
Brand: JET TRIBE Model: JTG-20415RD
Comfort Foam:Instead of forcing a flat piece of foam to wrap around a rider’s body, the pre-formed mold adds the ultimate in flexibility to conform to the rider’s chest and back.25th Anniversary Features:Upgraded Black Lanyard Loop color, new velcro patch attachment, 25th Anniversary logoCompetition..
65.00KD
Brand: JET TRIBE Model: JTG-19485GN
PROTECTION:US Coast Guard (CGA) Type 3 Certified. Strength Tested up to 100 MPH.RESCUE:Rescue Handle to help pull a downed rider back up on their ski.SIDE-ENTRY:3-buckle side closure allows for better side-to-side movement for a watercraft rider.VELCRO PATCH:Includes a Jettribe shoulder velcro patch..
55.00KD
Brand: JET TRIBE Model: JTG-19485PT
PROTECTION:US Coast Guard (CGA) Type 3 Certified. Strength Tested up to 100 MPH.RESCUE:Rescue Handle to help pull a downed rider back up on their ski.SIDE-ENTRY:3-buckle side closure allows for better side-to-side movement for a watercraft riderLANYARD LOOP INCLUDED:Jettribe's famous yellow Lanyard ..
55.00KD
Brand: JET TRIBE Model: JTG-19485RD
PROTECTION:US Coast Guard (CGA) Type 3 Certified. Strength Tested up to 100 MPH.RESCUE:Rescue Handle to help pull a downed rider back up on their ski.SIDE-ENTRY:3-buckle side closure allows for better side-to-side movement for a watercraft rider.VELCRO PATCH:Includes a Jettribe shoulder velcro patch..
55.00KD
Brand: JET PILOT Model: JA20207-BK
Ready for summer on the water? Jetpilot's 2020 The Cause Ladies Neo Life Jackets is a lightweight segmented fit neoprene vest, ideal for Jet skiing, boating and wakeboarding. This is the perfect cross over vest built with action sports in mind and suitable for all water sports ac..
50.00KD
Brand: JET PILOT Model: JA20207-BU
Ready for summer on the water? Jetpilot's 2020 The Cause Ladies Neo Life Jackets is a lightweight segmented fit neoprene vest, ideal for Jet skiing, boating and wakeboarding. This is the perfect cross over vest built with action sports in mind and suitable for all water sports ac..
50.00KD
Brand: JET PILOT Model: JA20207-GREY
Ready for summer on the water? Jetpilot's 2020 The Cause Ladies Neo Life Jackets is a lightweight segmented fit neoprene vest, ideal for Jet skiing, boating and wakeboarding. This is the perfect cross over vest built with action sports in mind and suitable for all water sports ac..
50.00KD
Brand: JET PILOT Model: JA20207-GREY/YELLOW
Ready for summer on the water? Jetpilot's 2020 The Cause Ladies Neo Life Jackets is a lightweight segmented fit neoprene vest, ideal for Jet skiing, boating and wakeboarding. This is the perfect cross over vest built with action sports in mind and suitable for all water sports ac..
50.00KD
Brand: JET PILOT Model: JA20207-RED/BLK
Ready for summer on the water? Jetpilot's 2020 The Cause Ladies Neo Life Jackets is a lightweight segmented fit neoprene vest, ideal for Jet skiing, boating and wakeboarding. This is the perfect cross over vest built with action sports in mind and suitable for all water sports ac..
50.00KD
Brand: JET PILOT Model: JA20217V-RED
Ready for summer on the water? Jetpilot's 2020 The Cause Mens Life Jackets is a lightweight segmented fit neoprene vest, ideal for Jet skiing, boating and wakeboarding. This is the perfect cross over vest built with action sports in mind and suitable for all water sports activities. T..
65.00KD
Brand: JET PILOT Model: JA18998
Product Description.Custom Supa Grip Suede Handle 75ft 4 Section PE mainlineCustom JP Velcro Rope Hanger..
20.00KD
Brand: JET PILOT Model: ACS21318
Our Jetpilot Hooded Towel is a super comfortable and must have accessory for all water sports to keep you on the go. Product Description.100% Micro Fibre HoodExternal Front PocketReusable PackagingPlease refer to care instructions before use..
34.00KD
Brand: JET PILOT Model: JA21288-BLACK/CAMO
A Personal Floatation Device (PFD) or life vest is an essential when participating in water-based activities. Whether you are on a personal watercraft, boat, kayak, wakeboarding, wake surfing or water skiing it is highly recommended you have a suitable life vest. PFD’s found on Jetpilot.com.au have ..
65.00KD
Brand: JET PILOT Model: JA21129-RED/WHT/BLU
30 Years of Innovation, Jetpilot's entire history can be contained in one simple sentence: Four friends with a passion for innovation set out to build the best riding gear and apparel for those who live the life. But enough about our history. Instead our sights are set on the next 30 years, because ..
45.00KD
Brand: JET PILOT Model: JA7005
Description 6m of Floating marine grade tow ropeSafety snap Hook at each endStows neatly with rope hanger“Soft Hook” works great with recessed bow eyes..
12.00KD
Brand: JET PILOT Model: ACS20907
30 Years of Innovation, Jetpilot's entire history can be contained in one simple sentence: Four friends with a passion for innovation set out to build the best riding gear and apparel for those who live the life. But enough about our history. Instead our sights are set on the next 30 years, because ..
21.00KD
Brand: LIQUI MOLY Model: 25059
LIQUI MOLY Marine Diesel Protect and Marine Diesel Bacteria Stop both eradicate microorganisms. However they cannot dissolve the sludge produced by the microorganisms up to that time. In the event of high infestation, it is therefore always necessary to clean the fuel tank. Both additives can be use..
5.50KD
Brand: LIQUI MOLY Model: 25041
Versatile product for use on grease points across all marine needs. Can also be used for exterior components which are exposed to salty air and seawater.Heavy-duty grease for many of the lubrication points in the maintenance of vessels. Reduces friction and wear. Extremely long-lasting lubrication p..
4.50KD
Brand: LIQUI MOLY Model: 1826
Universal application in the areas of workshop, home, garden and industry. For hinges, rollers, locks, bolts, switches, handles, Bowden cables, vehicle antennas and much more. Maintains and protects the entire electrical system.ulti-functional spray with 7 performance benefits: 1. Suppresses moistur..
1.50KD
Brand: LIQUI MOLY Model: 8351
For increasing the octane number of gasoline.Octane Plus is a self-mixing combination of agents formulated according to state-of-the-art additive and fuel technology. Octane Plus is for universal use and increases the research octane number (RON) of the fuel by 2-4 points, depending on the RON. Than..
2.50KD
Brand: MSD Model: 4294
Replaces stock Kawasaki® and Yamaha™ coilsMolded-in 8.mm super conductor wires30KV output voltageUsed with Enhancer Ignition for Yamaha® 650/701 and Kawasaki® 750 onlyAlso applicable with the Yamaha® Banshee (Quad)..
54.00KD
Brand: MSD Model: 42921
Depending on your application, you'll have two, three or four of these coils. The result is a high voltage spark that is capable of full output through high racing rpm...
45.00KD
Brand: MSD Model: 4390
Need a relay that can handle serious current? The MSD Heavy Duty Relay will support up to 65 amps which is perfect for high performance nitrous solenoids or fuel pumps. It is constructed to lock out moisture and can live in racing and underhood environments thanks to the stainless steel mount...
34.00KD
Showing 1 to 100 of 246 (3 Pages)