WATERCRAFT

Stay cozy and stylish after your water adventures with the JETPILOT Men's Flight Hoodie Towel. This ultra-soft, absorbent towel features an oversized design for maximum coverage and a built-in hoodie for extra warmth.Features:Quick-drying, 100% Microfiber fabric Generous size for easy changingReusab..

3/8" 90 Degree Water Bypass Fitting Black 56-2012, 90 degree angled outlet, 3/8" hose fitting..

3 degree angled reed spacer kit for the Kawasaki 800 and 750 engines. Includes billet aluminum spacers, gaskets, studs, and 1 additional pulse fitting. The studs that are included are for the stock intake manifold. If you are using an aftermarket intake, you may need to use longer studs if t..

Billet aluminum bilge outlet fitting for use with a 3/4 inch hose...

Billet aluminum bow eye bushing for Kawasaki Jet Skis. Bushing has a 1" diameter and a 0.815" thru hole...

8mm cable to 10mm throttle adaptor for Kawasaki Jet Skis when using and aftermarket throttle lever assembly.  These are machined in-house from brass.  Sold with the adaptor and locking nut...

Billet brass throttle cable adaptor for Yamaha Super Jet, WaveBlaster, etc. Also fits 1995 and earlier Kawasaki standup Jet Skis. This adaptor converts a 6mm threaded cable end to 10mm...

New lightweight design for 2018!  Billet aluminum drive coupler set. Uses stock Kawasaki 750/800 rubber dampner.  Machined in hex on backside.  Clear anodized for protection against salt water corrosion...

Billet hood hooks for the Yamaha Super Jet designed by freestyle guru Jeremy Parr. Instead of the hood sliding forward into the hooks, these face forward so the the hood comes back into them holding the hood from coming backward...

Billet aluminum handlepole spring tensioner for the Kawasaki 800SXR and 1500SX-R. Includes billet black anodized bracket and stainless hardware...

Clip apart so they can be used as wrist or vest lanyardMade of polyurethane cord that floatsCome with one-hand easy-glide slider..

Atlantis easy-glide slider can be attached to jacket or wristTop-quality replacement lanyards for most models without DESSVery affordable alternative to OEM lanyards..

Atlantis easy-glide slider can be attached to jacket or wristTop-quality replacement lanyards for most models without DESSVery affordable alternative to OEM lanyards..

Atlantis easy-glide slider can be attached to jacket or wristTop-quality replacement lanyards for most models without DESSVery affordable alternative to OEM lanyards..

Now there is a way to ride all non-DESS watercraft without changing lanyards..

Pro Floating Lanyards are designed for safety, security and durabilityMarine whistle clips on or offWon't come off wrist - even when racingWrist strap is made from marine-grade webbing with quick hook-and-loop fastenerLanyard is polyurethane reinforced with nylon cordHigh-quality key ends work with ..

Product DescriptionThe Blowsion Bilge Pump Mount is designed to mount the Rule Bilge Pump (Sold Separately). The bracket mounts to the lower two bolts of the driveshaft bearing carrier. Includes rivets to mount bilge pump strainer to bracket. Anodized Black. Fits all Kawasaki SXR 1500 Mode..

Product DescriptionSingle bilge pump mounting bracket for all 1994 and newer Yamaha Super Jet Models. The bracket locates the bilge pump within millimeters from the base of the Super Jet hull. Easy built in installation, no messy adhesives. All hardware included.NOTE: 1990-1993 Yamaha Superjets with..

Top Quality Yamaha Traction Pad.96-13..

Top Quality Yamaha PWC Traction Pad...

Heavy Duty Replacement Hood Seal. Fits all years Yamaha Super Jet, Yamaha FX-1, all years Polaris Octane, Yamaha Wave Blaster and most aftermarket hulls. Includes 3M self adhesive backing for easy installation! Dimensions: L 2.7m x W 16mm x H 19mm...

Blowsion Hood Strut Lift Kit for Yamaha WaveBlaster. Can be adapted to other fixed steer applications with custom fitment. Includes Bracket, Struts, Hardware and Installation Instructions...

Launched! - We have taken one of the oldest aftermarket products in our industry and refined every element imaginable. Introducing the 2023 Blowsion Pro Throttle Lever. Our new billet adjustable Pro Lever sets the standard for quality, rider comfort and cutting edge design while being proudly manufa..

Blowsion Aluminum Pump Shoe for Yamaha 144mm Pumps. Replace that easily broken OEM plastic intake duct with this unbreakable aluminum replacement. Fits all years Yamaha Superjet, 1993-1996 WaveBlaster 1, Polaris Octane and Rickters. Mounting holes are not drilled or tapped so install in the differen..

Eliminates breaking of expensive bilge switches and primer bulbsMount enables the switch/primer to sit flush, eliminating the risk of being knocked offIncludes a brushed aluminum black anodized bezel and all necessary mounting hardwareDash mount measures approximately 3.6" L x 1.5" W x 1.1" DBezel O..

Product DescriptionGusseted and welded heavy duty aluminum construction with easily fold-able hinged design make transportation and storage simple and sanitary. Features 1.5 inch Blowsion sublimated webbing with all stainless hardware. Allows the rider to elevate the ski in shallow water protecting ..

Blowsion Steering System 1-1/8" - 03-05-010 - WATERCRAFT Handlebar & Controls..

Vacate Valves operate on the same principle as the Blowsion One Way valves, using the forward motion of the watercraft and gravity to allow ingested water to simply vacate the hull in one direction onlyDirect threaded replacements for the flimsy OEM plastic drain plugs, the Vacate Valve also simplif..

UNIVERSAL USB/3.5mm AUXILIARY INTERFACE MOUNTUse with any Radio with Rear USB/RCA InputsDustproof, Water Resistant Rubber CoverUV ResistantUSB / RCA 6 Feet Extension Cable1.5" Through Hole Mount–Requires 1-1/8" (29mm) Cutout..

The Excellent Quality Boss Audio MR652C 6.5" 2-Way Marine Speakers - (Pair) White Product description 6.5" 2-Way Marine Speaker

Includes removable tweeters and crossovers to be used as a component set.

Features:
•     Power Handling, Peak: 350W
•     Imped..

General Specs•     Weather Proof Full Range 5.25" 2-Way Speaker Pair•     150 Watts MAX 75 Watts RMS Power Handling per Pair•     80 Hz to 20 kHz Frequency Response and 89dB Sensitivity•     Polypropylene Woofer Cone ..

BOSS Audio Systems BOSS Audio MRGB65B 6.5 Inch Marine Speakers - Weatherproof, 200 Watts Per Pair, 100 Watts Each, Multi-Color Illumination, Full Range, 2 Way, Sold In Pairs, BLACK •     Full Range 200 Watt 6.5" 2-way Speakers •     Power Handling (peak): 1..

BOSS Audio Systems MR60W 200 Watt Per Pair, 6.5 Inch, Full Range, 2 Way Weatherproof Marine Speakers Sold in Pairs About this item •     Brand: Boss Audio Systems •     200 Watt max power 2-way marine loudspeaker •     Mounting Depth 2-5/..

BOSS Audio Systems MR6W 180 Watt Per Pair, 6.5 Inch, Full Range, 2 Way Weatherproof Marine Speakers Sold in Pairs Model Name MR6W Brand BOSS Audio Systems Sound clarity 80 hertz Color WH..

•                   BOSS Audio Systems MR52B 150 Watt Per Pair, 5.25 Inch, Full Range, 2 Way Weatherproof Marine Speakers Sold in Pairs•     Weather Proof Full Range 5.25" 2-Way Sp..

BOSS Audio Systems MRC10 Marine Waterproof Radio Cover, White  •     Weather Proof Featuring Spring Activated Flip-up Cover•     Poly-Carbonate Tinted Front Panel•     UV-stabilized ABS Plastic•     Impact-re..

DescriptionFeatures 1.5 kg Coated Grapnel Anchor7.6m or marine grade anchor lineComplete system stows in small spacesStainless steel snap hookPadded nylon case protects finishes and dampens noise when stowed..

HIGH-PERFORMANCE COUPLER DAMPERSRubber coupler damper for WSM billet coupler kits or OEM replacementFITMENTS:MakeModelYear(s) KawasakiJS 3001986-1988 KawasakiJS 4401977-1992 KawasakiJS 5501982-1989 KawasakiSC 6501991-1995 KawasakiSS 7501992-1997 KawasakiSSXI 7501993-199..

27mm Crankshaft Side..

Factory Pipe 3-Bolt Headpipe Gasket. Fits all Yamaha and Kawasaki FP Headpipes...

The Factory Pipe 701 Super Jet comes complete with the exclusive tune-able headpipe, aluminum chamber, tuned exhaust manifold and all required hardware. It is available in both a MOD (FIN701SJ02 - PN# 01-01-054) version. Fits all years of Super Jet with 701 motor. Will not fit 650 motor Super Jets. ..

Blowsion manufactured Factory Pipe replacement coupler. This double compound thickness heavy duty silicone exhaust coupler fits "A" and "B" Headpipes including Kawasaki, Yamaha and Polaris Wet pipes. (DIMENSION 4"X 2 1/8") This is NOT the thin blue coupler model offered by other suppliers, but a spe..

Blowsion Heavy Duty Elbow Coupling. Super Durability tested Blowsion manufactured pipe elbow replaces the weak existing elbows on the market. Required when running Superjet LTD or Mod Chamber B Pipes. Allows connection to the OEM or Factory Pipe waterbox...

This is only use for J-130SX...

FACTORY ZERO ATV Hitch Kit for JET Launcher 4 Wheels SX-R 1500..

BAR : H2310xW80xD80mm/6.0kgBOX : H400xW230xD160mm/4.5kg..

The best selling Jet Launcher for Stand-Up Ski in Japan.Quick and Easy assembly and disassembly that does not require any tools.No bolts and nuts. Just pull and push Hitch Pins and assembly and disassembly is complete in just minutes.A special angle handle design makes it easy to launch and load a s..

We upgraded new JET LAUNCHER is based on the conventional J-130SX.Used a new high strength original 44 mm square pipe material.This Jet Launcher lengthened the frame to get a good balancefor a long hull.It also strengthened the axle part that can withstandthe weight of 4 cycles.Change to bar grip ty..

Extra strong and durable design with bolts and nuts assembly.This model is designed for the large 3 seat watercraft.Just load PWC onto tote and push across any and all surfaces.　BOX : H1635xW260xD170mm/11.5kg        H640xW530xD90mm/1.4kgTIRE :H475xW475xD510mm/12kg ..

Product DescriptionFlow Control Valve - 3/8" Adjustable Pro Model. This 3/8" valve has been designed to prevent water flow to the waterbox at idle and off idle engine speeds. This allows the craft to be more responsive off the line and around turns. Results are HUGE gains in throttle response. All s..

FLUSH KITSAllow easy flushing of cooling system to keep it at peak efficiencyClean system of debris and contaminants including saltwater, sand and sedimentKits designed for specific applicationsQuick-snap release feature available for most modelsReplacement adapter hoses with quick-snap ends availab..

Blowsion Factory Pipe Headpipe Screw Kit - Standard Size. Replacement for those seized up water adjusting screws. Compatible with all Factory Headpipes...

Get added control by adding 1″ thick Side Lifter Wedges. Available in Black only. Comes with 3M self-adhesive backing for a strong bond to paint or fiberglass..

Upgrade your PWC with new traction mats from Hydro-Turf. Available in many colors and grooves..

This is a HT Premier seat cover in our ALL BLACK Standard Colorway A (Black Suede, Black Carbon Fiber and White Stitching)...

This is a HT Premier seat cover in one of our Standard Colorways (As Shown)...

This is a HT Premier seat cover in one of our Standard Colorways..

Upgrade your PWC with new traction mats from Hydro-Turf. Available in many colors and grooves...

Upgrade your PWC with new traction mats from Hydro-Turf. Available in many colors and grooves.Mats include 3M Self-Adhesive for a much faster and cleaner installation...

Upgrade your PWC with new traction mats from Hydro-Turf. Available in many colors and grooves..

COMFORT FOAM:The pre-formed mold curves around the chest and back for ultimate flexibilityCOMPETITION LEVEL VEST:SGS Buoyancy Certified for closed course racing or private recreation. No USCG Certification...

Comfort Foam:Instead of forcing a flat piece of foam to wrap around a rider’s body, the pre-formed mold adds the ultimate in flexibility to conform to the rider’s chest and back.25th Anniversary Features:Upgraded Black Lanyard Loop color, new velcro patch attachment, 25th Anniversary logoCompetition..