Engine Performance

3 degree angled reed spacer kit for the Kawasaki 800 and 750 engines. Includes billet aluminum spacers, gaskets, studs, and 1 additional pulse fitting. The studs that are included are for the stock intake manifold. If you are using an aftermarket intake, you may need to use longer studs if t..

Blowsion Heavy Duty Elbow Coupling. Super Durability tested Blowsion manufactured pipe elbow replaces the weak existing elbows on the market. Required when running Superjet LTD or Mod Chamber B Pipes. Allows connection to the OEM or Factory Pipe waterbox...

Blowsion Factory Pipe Headpipe Screw Kit - Standard Size. Replacement for those seized up water adjusting screws. Compatible with all Factory Headpipes...

Blowsion Pro Water Bypass Fittings increase engine performance by diverting some of the water from the cylinder head to the bypass fitting, rather than forcing all of the water through the exhaust system. Fits 3/8" ID Cooling Hoses...

New lightweight design!  Billet aluminum drive coupler set. Uses stock Kawasaki 750/800 rubber dampener.  Machined in hex on backside. Clear anodized for protection against saltwater corrosion...

The Factory Pipe 701 Super Jet comes complete with the exclusive tune-able headpipe, aluminum chamber, tuned exhaust manifold and all required hardware. It is available in both a MOD (FIN701SJ02 - PN# 01-01-054) version. Fits all years of Super Jet with 701 motor. Will not fit 650 motor Super Jets. ..

Depending on your application, you'll have two, three or four of these coils. The result is a high voltage spark that is capable of full output through high racing rpm...

Product DescriptionSpark plug wires have two main objectives; transfer the spark energy and suppress the Electro Magnetic Interference (EMI) that the spark voltage creates. The MSD 8.5mm Super Conductor delivers the best of both worlds! MSD uses a special copper conductor keeping resistance under 50..

..

Reference: MX-AF-Condition: New productAir filter tornado mx100 2.0..

Bac à batterie MX100Reference: MX-BAC-BAT-Condition: New product..

Get rid of that boring OEM cover and had some bling to that engine bay. O-ring included...

The standard spark plug is manufactured to enhance the performance of any vehicle. It is constructed from durable materials that are corrosion and abrasion resistant. The spark plug insulators are made of 99 percent pure alumina silicate, allowing for longer insulator noses for reduced fouling. Soli..

Starters are manufactured to meet or exceed OEM specificationsInsulated armature for rust and corrosion protectionRubber seals on top and bottom side of unit-ensures dry operation for longer life90/10 copper bushings for a longer life..

The RRP Waterbox EVA block fits both RRP Waterboxes and has been shaped to fit the bottom of the waterbox perfectly. Designed to cradle Rick Roy aluminum waterbox RRP-OE-WTR-BOX-V2.Fitment: Yamaha SuperJet (1996-2020)..

This Rick Roy aluminum waterbox directly replaces the OEM waterbox in stock to mildly modified 2-stroke Yamaha SuperJets (1996~2020). Includes 1/8" NPT threaded fitting for water injection tuning. Powder coated to prevent corrosion. RRP Foam Pad sold separately...

Life-tested drives meet or exceed OEM specifications100% interchangeable with OEM parts..

Fitment: Kawasaki 750/800 (A1); 800SX-R (2003) JS800A1, 750SXI (1995-97), 750SX-A1, JS750B1 / B2 / B3, 750SXI-PRO (1998-2002) JS750C1-5Supports the engineBecause it is a reinforced coil, it is tougher than normal...

Applications: Yamaha Superjet 700 twin carb/ Yamaha 701/760 enginesModel Years: AllThe VForce reed valve system by Moto Tassinari has been the reed valve system of choice by anyone serious about two-stroke engine performance for the last 10+ years. The simple premise of the VForce3 reed va..

MT 2 Cylinder Reed Valve Assembly has been the reed valve system of choice by anyone serious about two-stroke engine performance for the last 10+ years. The simple premise of the V-Force 2 reed valve system is to increase engine power and throttle response by increasing the efficiency over a convent..

Watt Hole was desgined to help keep your rotary switch out of harms way to prevent breakage or injury .Simply drill hole and install enire unit and wire in switch or use existing rotary switchAlso works with primer bulbs as well..

Fitment: Kawasaki JS 300 (1986-1988), JS 440 (1977-1992), JS 550 (1982-1989), SC 650 (1991-1995), SS 750 (1992-1997), SSXI 750 (1993-1997), ST 750 (1994-1995), STS 750 (1995-1997), STX 750 (1998), STX 900 (1997-1998), SX 300 (1987-1991), SX 550 (1990-1995), SX 650 (1987-1993), SX 750 (1992-1995), SX..

1/4'' X 1/4'' X 1/4'' Plastic Fitting..

FITMENTS:MakeModelYear(s) KawasakiSC 6501991-1995 KawasakiSS 7501992-1995 KawasakiSSXI 7501993-1997 KawasakiST 7501994-1995 KawasakiSTS 7501995-1997 KawasakiSTS 9002001-2002 KawasakiSTX 11001997-1999 KawasakiSTX 7501998 KawasakiSTX 9001997-2006 Kawas..

FITMENTS:MakeModelYear(s) KawasakiSC 6501991-1995 KawasakiSS 7501992-1997 KawasakiSSXI 7501993-1997 KawasakiST 7501994-1995 KawasakiSTS 7501995-1997 KawasakiSTS 9002001-2002 KawasakiSTX 11001997-1999 KawasakiSTX 7501998 KawasakiSTX 9001997-2006 Kawas..

Includes head shell, domes, and orings. Head shell is clear anodized for protection against corrosion. This head is completely sealed by orings, no head gasket required. Dual water outlets for additional cooling.The stock head on a 2003 SXR800 measured 32.7cc with the head gasket(31cc head volume + ..

MT 2 Cylinder Reed Valve Assembly has been the reed valve system of choice by anyone serious about two-stroke engine performance for the last 10+ years. The simple premise of the V-Force 2 reed valve system is to increase engine power and throttle response by increasing the efficiency over a convent..

VFORCE3 REED VALVE SYSTEMSFuel & Air Systems The advancement of reed technologySnap-together cage uses symmetrical reed petals, eliminating the need for different "inner" and "outer" replacement petalsReed tip shape accelerates air mixture, ensuring increased airflow for increased horsepowerInno..

Blowsion-manufactured Factory Pipe replacement coupler is not the thin blue coupler model offered by other suppliers, but a spec-manufactured coupler made out of high-heat silicone hoseDouble-compound-thickness, heavy-duty silicone coupler fits "A" and "B" headpipes including Kawasaki, Yamaha and Po..

Inline Fuel Filter 1/4". Clear Plastic for High Volume, Low pressure Fuel Systems. Inline fuel filters filter out those harmful particles that can cause engine damage...

WatercraftFACTORY PIPE ELBOW COUPLING HOSEFOR YAMAHA SUPERJET 96-20Allows connection to the OEM or factory pipe waterboxRequired when running SuperJet LTD chamber b-pipesSuper durability-tested Blowsion pipe elbow replaces the weak existing elbows on the market..

Universal Fuel Pickup Filter. Add some of these for extra fuel filtration and also keeps the fuel in your lines when going upside down...

SOLD BY 1 METER Finish the look of your engine compartment with Blowsion specialty colored 1/4" fuel hose. Available in Clear, Blue, Green, Orange, Red, Yellow, or Black. Quantity is sold by the foot in continuous lengths..

This Stock exhaust mounting bracket is for the ADA non-girdled billet head. Includes mounting bolts and spacers. This bracket only works with the 3 bolt 701 style Stock exhaust. It does NOT work with the 4 bolt 760 exhaust...

Mikuni high and low-speed adjuster screws with "T" cross bar - extended length for easy adjustment. Absolutely a must when running aftermarket pipes...